info@utscanada.com / 905-669-5327
HomeOur ProductsASTM-E-83, ISO 9513
ASTM-E-83, ISO 9513

Standard Practice Verification and Classification of Extensometer Systems.

United High Capacity Smart Universal Hydraulic Floor Model DFM tension and compression testing machines with computer control are available with capacities from 300 kN (67,500 lbf) to 2,000 kN (450,000 lbf). Available with extended columns. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
United SFM Smart Electro-Mechanical Universal Floor Models are the logical choice when maximum crosshead travel and load frame capacity are required. The United SFM Models SFM Universal Testing Machines offer a choice of five standard load frame capacities ranging from 1,000 lbf (4.45 kN) to 135,000 lbf (600 kN).Testing can be done in tension and/or compression. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
Servo-Controlled Hydraulic Floor Model 2000 kN (450,000 lbf). United SHFM 1000 and SHFM 2000  kN Hydraulic Testing Machines have four columns and test in Tension or Compression (Universal). The SHFM Hydraulic testing systems are fully accessorized and include the following at no additional cost: Hydraulic Grips with inserts for both flat flat and round test specimens, Flex Fixture and Compression Plates. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
Designed for measuring R-values in sheet metal testing. This Extensometer averages the lateral strain at two locations. 
Series 3542 General purpose Extensometer for axial tensile, compression and cycle testing. Gage lengths from 0.5 to 2 inches (and 10 to 50mm) and measuring ranges from 5% to 100% strain.
Model 3542 Axial Extensometer with 2" gauge length and +50/10% measuring range. This Extensometers is designed for testing a wide range of materials, including metals, plastics, composites and ceramics  and will work in tension and compression. The dual flexure design makes them very rugged and insensitive to vibrations, which permits higher frequency operation.
General purpose Extensometer for axial tensile, compression and cycle testing. Gage lengths from 0.5 to 2 inches (and 10 to 50mm) and measuring ranges from 5% to 100% strain.
General purpose Extensometer for axial tensile, compression and cycling testing. Gage length from 0.5 to 2 inches and measuring ranges from 5% to 100% strain.
General purpose Extensometer series 3542 for axial tensile, compression and cycle testing. Gage lengths from 0.5 to 2 inches (and 10 to 50mm) and measuring ranges from 5% to 100% strain.
Series 3575 Extensometers are designed for general purpose transverse or diametral strain measurement on axially loaded specimens.